Laser-cut stainless steel architectural panel, geometric cut pattern in dark industrial light.

Laser-Cut Stainless Steel Panels

Custom architectural panels, cut to your drawing.

DXF to delivered. We review every drawing for manufacturability before quoting — 304 / 316 stainless, ±0.1mm tolerance, brushed or PVD finish.

Send Drawing for DFM Review View Capability Sheet
Before You Spec the Panel

Where does your panel go?

Same cutting envelope. Three different specs by install — lobby gets flush edges, facade gets aligned holes, outdoor gets 316 marine. Drag to find yours.

Drag to compare lobby, facade, and outdoor specs.

Brushed stainless steel feature panel installed in a hotel lobby reception wall
LOBBY · 1–3MM
Interior Feature Cut

Edges deburred flush. Film on. Ready to hang.

Most lobby panels land with burrs your installer has to file off — or sharp points your designer has to apologize for. Ours land with edges deburred flush, protective film both sides. Your installer hangs and walks.

Hotel lobbyRestaurant dividerOffice receptionStair screen
Quote My Lobby Cut

Send a drawing or site photo. We match the spec in 24 hours.

Laser-cut stainless steel facade module installed on a building exterior with aligned hole coordinates
FACADE · 2–5MM
Facade Module Cut

Hole coords aligned. No site drilling.

Most facade panels need 2–3 days of site drilling because hole coords miss the architect's module — and scaffolding burns day-rate. Ours arrive pre-coordinated to your facade BIM. Your contractor lifts, bolts, moves on.

Hotel facadeOffice claddingCurtain wall infillParking screen
Quote My Facade Module

Send a drawing or site photo. We match the spec in 24 hours.

316 marine-grade stainless steel laser-cut screen installed in a villa courtyard with PVD bronze finish
OUTDOOR · 3–6MM
Marine-Grade Cut

316 marine. Wind-load profile. No callbacks.

304 stainless rusts at edges within two coastal seasons. Thin-gauge panels warp under wind load — and your villa client calls. Ours: 316 marine grade, deeper edge profile, brushed or PVD bronze. Holds through salt air and 15+ seasons.

Villa courtyardPool deckGarden screenBoundary fence
Quote My Site Cut

Send a drawing or site photo. We match the spec in 24 hours.

Capability Range

Laser-Cut Panel — Manufacturing Envelope

Standard ranges. If your spec falls outside, we review feasibility case by case.

Parameter Range Status Note
Max Panel Size 3000 × 1500 mm Standard Larger — nesting review
Material Thickness 0.5 — 6.0 mm Standard >6mm — CO₂ switching
Tolerance (linear) ±0.1 mm Standard Per GB/T 1804-m
Min Web Width ≥ 3.0 mm Review Depends on pattern
Max Open Area ≤ 70 % Review With stiffener bars
Hole Edge Distance ≥ 2× hole Ø Standard Structural minimum
Surface Finish Brushed / Mirror / PVD Standard Color matching available

Values listed are standard ranges. Submit your drawing for custom feasibility review.

Check My Spec Against This Table

Click any column to sort

PANELS

THE NEXT STEP

Your drawing, DFM-checked in 24 hours.

Send your DXF, DWG, or PDF — plus where it goes (lobby, facade, or outdoor). Your manufacturing engineer returns with feasibility, thickness recommendation, finish, and price.

Send My Drawing Chat on WhatsApp
PROJECT EVIDENCE

Cut to drawing. Specified by architects.

Four laser-cut installs across three install contexts. Hotel lobby in Paris. Lobby zoning in Bangkok. Mall courtyard in Dubai. Mountain villa in Aspen. Same cutting envelope — four finishes, four climates.

Paris Boutique Hotel Lobby Screens
Boutique Hotel Lobby Screen Indoor · Brushed #4 · 1.5mm Stainless

Paris Boutique Hotel Lobby Screens

Paris, France

Key Proof
  • Decorative laser-cut motif developed against the interior designer's pattern brief
  • Edges deburred flush — installer hung without site finishing
  • Brushed #4 grain matched panel-to-panel for visual continuity

We sent the DXF with the motif and got back a DFM report inside a day. Panels arrived edges-flush and grain-matched — installed in two evenings without touching a file.

Interior Design Lead
Boutique Hotel Project, Paris
View Project Photos
Bangkok Boutique Hotel Lobby Zoning
Hotel Lobby & Event Hall Zoning Indoor · Champagne Gold PVD · Modular

Bangkok Boutique Hotel Lobby Zoning

Bangkok, Thailand

Key Proof
  • Linear grid pattern across 80+ panels — modular for site assembly
  • Champagne gold PVD coating, color-matched to brass fixtures
  • Hole coordinates pre-aligned to hospitality contractor's mounting frame

Panels arrived numbered, with hole coordinates that lined up to our frame on the first try. No site drilling, no scaffolding overrun.

Hospitality FF&E Lead
Bangkok Boutique Hotel
View Project Photos
Dubai Hills Mall Courtyard Geometric Screens
Mall Courtyard Geometric Screen Outdoor · High-UV PVD · 3mm Stainless

Dubai Hills Mall Courtyard Geometric Screens

Dubai, United Arab Emirates

Key Proof
  • Geometric shade screen designed for arid-zone UV exposure
  • PVD coating selected for desert UV color permanence
  • Wind-load profile sized for mall-courtyard wind tunnel calculation

PVD held color through the first two summers without callback. Facade contractor lifted and bolted modules in three days.

Facade Architect
Dubai Hills Mall Project
View Project Photos
Aspen Mountain Villa Garden Screens
Mountain Villa Garden Screen Outdoor · Reinforced 316L · Snow Load Rated

Aspen Mountain Villa Garden Screens

Aspen, Colorado, USA

Key Proof
  • 316L marine grade — alpine snow + mountain UV combined load
  • Deeper edge profile sized for residential snow-load engineering
  • Brushed finish chosen to weather into a soft patina with the landscape

Shipped at -20°C site conditions. Three winters in, edges still hold true. No client callback yet.

Landscape Architect
Aspen Villa Project
View Project Photos

Swipe to explore projects

How We Work

From Drawing to Delivery — 5 Steps

Each step has a gate. Nothing moves forward without sign-off.

01
Drawing Review + DFM

Drawing Review + DFM

We check pattern geometry, hole alignment, and edge distance against our cutting envelope. You get a DFM report within 24 hours.

Lead — 24h
02
Material + Nest Optimization

Material + Nest Optimization

Grade verified, thickness checked, nest layout optimized for yield. MTR provided on request.

Lead — Same day
03

Laser Cutting

Fiber laser cutting at ±0.1mm tolerance. Real-time monitoring with automatic stop on deviation.

Lead — Per batch size
04
Deburr + Edge Treatment

Deburr + Edge Treatment

All edges deburred, sharp points rounded. Surface finish applied per spec — brushed, mirror, or PVD coating.

Lead — 1 to 3 days
05
QC Check + Protective Packaging

QC Check + Protective Packaging

Dimensional report, photo documentation, protective film applied. Shipped flat on wooden pallets.

Lead — Same day
5-step gate · sign-off at every stage Send Drawing for DFM Review
Method Guide

Which Cutting Method for Your Panel?

Not every pattern needs laser. Here's how to decide.

Method · A

Laser Cutting

Pattern Complexity
95%
Edge Quality
90%
Speed / Cost
85%
Thickness Range
70%
Recommendation

Best for decorative panels with complex geometry, screens, and architectural features under 6mm.

Method · B

Punch / Nibble

Pattern Complexity
40%
Edge Quality
75%
Speed / Cost
95%
Thickness Range
90%
Recommendation

Best for high-volume production of repeated patterns — grilles, ventilation panels, perforated sheets.

Method · C

Waterjet

Pattern Complexity
85%
Edge Quality
95%
Speed / Cost
50%
Thickness Range
100%
Recommendation

Best for thick plates, heat-sensitive alloys, or when zero heat-affected zone is required.

Not Sure Which Method? Send Drawing

We recommend the right method, free

Quality Control

Every Panel Is Measured — Not Assumed

QC happens at 3 gates: incoming material, mid-process, and final inspection.

QC Active Real-time production monitoring
Metric 01 · Radial

Dimensional checks per panel

4 edges + 4 critical dimensions

Metric 02 · Gauge
±0mm

Standard tolerance

Linear, per GB/T 1804-m

Metric 03 · Donut

Material traceability

MTR linked to batch number

Metric 04 · Line
<0%

Target defect rate

Measured monthly, trending down

6mo ago ↓ Trending down Today
See Full QC Checklist

3-gate inspection · in-house

Common Questions

FAQ — Laser-Cut Panel Production

Search or browse by topic.

DXF, DWG, and PDF. DXF is preferred for fastest processing. If you only have a sketch or photo, send it — we can redraw it for DFM review.
Minimum web width is 3mm. Holes should be at least 1.5× material thickness. We flag violations in the DFM report.
Yes. Send a photo or scan. We redraw to DXF and send back for approval before quoting.
304 and 316 are standard. 201 and 430 available on request. MTR provided for all grades.
0.5mm to 6.0mm standard. Thicker plates possible with CO₂ laser or waterjet — we review case by case.
We supply. All material sourced from verified mills with traceability certificates.
Brushed (#4), mirror (8K), PVD color coating, and powder coating. Sample chips available on request.
Yes. Send a sample or photo. We produce a match sample for approval before batch production.
Yes. All edges are deburred and sharp points rounded. The cut face itself is clean — no secondary finishing needed for most applications.
Flat on wooden pallets with protective film on both sides. Edge protectors on request. Fumigation certificate for export.
Standard lead time is 15–20 days after drawing approval. Rush orders possible — ask.
Yes. FOB Shanghai or CIF to your port. Door-to-door available via DHL/UPS for small quantities.
Question Not Listed? Ask Directly

Reply within 24h · WeChat / Email

Start Your Project

Send Your Drawing — DFM Review in 24 Hours

Upload your DXF, DWG, or PDF. We check manufacturability and reply with a quote or feasibility report.

Panel Manufacturing Inquiry

We reply within 24 hours with DFM feedback and quote.

DXF, DWG, PDF, or image. Max 10MB.

Your information is used for quoting only. We do not share data.

Prefer WhatsApp?

Send your drawing directly. We review feasibility and reply within hours.

Chat on WhatsApp

What happens next

  1. 1 We review your drawing for manufacturability within 24 hours.
  2. 2 You receive a DFM report with feasibility notes and quote.
  3. 3 Approve sample. Production begins with full traceability.

Trust signals

  • 24-hour DFM response
  • NDA available on request
  • No MOQ for drawing review
  • MTR + QC records included